Home LAN/MAN LAN General How to configure IRB(Integrated Routing and Bridging)

[ Backgroud ]

PC1 is connected to Fa0/0(no IP address, bridge) of Router = IP 10.10.10.1/24
PC2 is connected to Fa0/1(no IP address, bridge) of Router = IP 10.10.10.2/24
PC3 is connected to Fa1/0(IP 20.20.20.1) of Router = IP 20.20.20.2/24
BVI is configured on Router = IP 10.10.10.3/24. (Gateway IP for PC1 and PC2)


Router#config t
Router(config)# bridge irb

Router(config)# bridge 100 protocol ieee
Router(config)# bridge 100 bridge ip
Router(config)# bridge 100 route ip

Router(config)# interface bvi
Router(config-if)# ip address 10.10.10.3 255.255.255.0

Router(config)# interface fa0/0
Router(config-if)# bridge group 100

Router(config)# interface fa0/1
Router(config-if)#
bridge group 100


Router# sh int irb

FastEthernet0/0

 Routed protocols on FastEthernet0/0:
  ip      

 Bridged protocols on FastEthernet0/0:
  appletalk  clns       decnet     ip      

 Software MAC address filter on FastEthernet0/0
  Hash Len    Address      Matches  Act      Type
  0x00:  0 ffff.ffff.ffff         1 RCV Physical broadcast
  0x2A:  0 0900.2b01.0001         0 RCV DEC spanning tree
  0x6D:  0 cc09.6dcf.0000         4 RCV Interface MAC address
  0x6D:  1 cc09.6dcf.0000         0 RCV Bridge-group Virtual Interface
  0xC0:  0 0100.0ccc.cccc        29 RCV CDP
  0xC2:  0 0180.c200.0000         0 RCV IEEE spanning tree
  0xC2:  1 0180.c200.0000         0 RCV IBM spanning tree
  0xC2:  2 0100.0ccd.cdce         0 RCV VLAN Bridge STP

FastEthernet0/1

 Routed protocols on FastEthernet0/1:
  ip      

 Bridged protocols on FastEthernet0/1:
  appletalk  clns       decnet     ip      

 Software MAC address filter on FastEthernet0/1
  Hash Len    Address      Matches  Act      Type
  0x00:  0 ffff.ffff.ffff        12 RCV Physical broadcast
  0x2A:  0 0900.2b01.0001         0 RCV DEC spanning tree
  0x6C:  0 cc09.6dcf.0001         0 RCV Interface MAC address
  0x6D:  0 cc09.6dcf.0000        14 RCV Bridge-group Virtual Interface
  0xC0:  0 0100.0ccc.cccc        29 RCV CDP
  0xC2:  0 0180.c200.0000         0 RCV IEEE spanning tree
  0xC2:  1 0180.c200.0000         0 RCV IBM spanning tree
  0xC2:  2 0100.0ccd.cdce         0 RCV VLAN Bridge STP

FastEthernet1/0

 Routed protocols on FastEthernet1/0:
  ip      

BVI100

 Routed protocols on BVI100:
  ip      
Router#

 

Router# sh int bvi 100
BVI100 is up, line protocol is up
  Hardware is BVI, address is cc09.6dcf.0000 (bia cc09.6dcf.0000)
  Internet address is 10.10.10.3/24
  MTU 1500 bytes, BW 100000 Kbit, DLY 5000 usec,
     reliability 255/255, txload 1/255, rxload 1/255
  Encapsulation ARPA, loopback not set
  ARP type: ARPA, ARP Timeout 04:00:00
  Last input never, output never, output hang never
  Last clearing of "show interface" counters never
  Input queue: 0/75/0/0 (size/max/drops/flushes); Total output drops: 0
  Queueing strategy: fifo
  Output queue: 0/0 (size/max)
  5 minute input rate 0 bits/sec, 0 packets/sec
  5 minute output rate 0 bits/sec, 0 packets/sec
     7 packets input, 690 bytes, 0 no buffer
     Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
     0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
     28 packets output, 3084 bytes, 0 underruns
     0 output errors, 0 collisions, 0 interface resets
     0 unknown protocol drops
     0 output buffer failures, 0 output buffers swapped out
Router#


Router# sh bridge

Total of 300 station blocks, 298 free
Codes: P - permanent, S - self

Bridge Group 100:

    Address       Action   Interface       Age   RX count   TX count
cc0a.6dcf.0000   forward   FastEthernet0/1   0          5          5
cc05.6dcf.0000   forward   FastEthernet0/0   0          5          5
Router#

 

 
Smart Link
Search
Statistics
Content View Hits : 2200523
Polls
Highly recommended firewall vendor?
 
Google Translation
English Arabic Chinese (Simplified) Czech Dutch French German Italian Korean Portuguese Russian Spanish Filipino Vietnamese Thai Turkish
BGP routing issue?
Banner
World Route Servers
Banner
Who's Online
We have 72 guests online