Home Vendor Cisco [Cisco] How to setup router as a tftp server
Attention

If the below procedure doesn't work for you, contact vendor/website or IT company for help.

 

This is very useful, especially your active TFTP server down. See detailed procedure below.

1. Check IOS that will be downloaded

Router_1#sh flash

-#- ED ----type---- --crc--- -seek-- nlen -length- -----date/time------ name

1 .. image 4A6B2161 137B5B8 21 20297016 Jan 11 2000 01:02:28 rsp-jsv-mz.122-13.

2. Activate TFTP server

Router_1#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Router
_1
(config)#tftp-server flash:rsp-jsv-mz.122-13.T16
Router_1
(config)#exit

3. Check a connectivity

Router_2#ping 20.20.30.5

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 20.20.30.5, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 4/6/8 ms

4. Copy IOS from Router_1 to Router_2

Router_2#copy tftp flash
Address or name of remote host []? 20.20.30.6
Source filename []? rsp-jsv-mz.122-13.T16
Destination filename [rsp-jsv-mz.122-13.T16]?
Do you want to over write? [confirm]
Accessing tftp://20.20.30.6/rsp-jsv-mz.122-13.T16...
Loading rsp-jsv-mz.122-13.T16 from 20.20.30.6 (via Serial0/1/0): !
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Router_2#


Last Updated (Wednesday, 06 May 2009 19:09)

 
Smart Link
Search
Statistics
Content View Hits : 2152190
Related Items
Polls
Highly recommended firewall vendor?
 
Google Translation
English Arabic Chinese (Simplified) Czech Dutch French German Italian Korean Portuguese Russian Spanish Filipino Vietnamese Thai Turkish
BGP routing issue?
Banner
World Route Servers
Banner
Who's Online
We have 82 guests online