Home Vendor Overture Networks Basic CLI commands for Overture ISG 5100

These days, I am more involving WAN Ethernet service product which is a bit complicated tooverture_logo.jpg troubleshoot. Simply, tons of vendors and gears in the market. If you are not dealing with those devices all the time, you would spend time to play with some commands until you get output what you want. WAN Ethernet service is very popular in data communication market in compatible price. By comparing to traditional circuit, it is a lot cheaper. Also, H/W cost is cheaper. It dramatically drops your maintenance cost. For those reasons, WAN Ethernet service will get more sunshine in the market.

By the way, there are many vendors out there. Seems like major players are Tellabs, Fujitsu, Cisco, Nortel, Ciena Corporation, Overture networks, Anda networks and etc.

Here is the basic commands for overture ISG5100 Ethernet Switch for carriers.

ISG5100.jpg

 

 

  • To see uptime

Overture_ISG5100# uptime
10:40pm  up 42 days,  3:03, load average: 0.00, 0.00, 0.00

 

  • To see all VLAN 

Overture_ISG5100# port show all vlan

                       Amt
Port    Type Pvid Pri Only IngF           Vlan/Label   Cir Burst Flow    Pause
-------------------------------------------------------------------------------
 2.1    Enet    0   1  off  off                 none   N/A   N/A  N/A      N/A
 2.2    Enet    0   1  off  off                 none   N/A   N/A  N/A      N/A
 2.3    Enet    0   1  off  off                 none   N/A   N/A  N/A      N/A
 2.4    Enet    0   1  off  off                 none   N/A   N/A  N/A      N/A
 2.5    Enet    0   1  off  off                 none   N/A   N/A  N/A      N/A
 2.6    Enet    0   1  off  off                 none   N/A   N/A  N/A      N/A
 2.7    Enet    0   1  off  off                 none   N/A   N/A  N/A      N/A
 2.8    Enet    0   1  off  off                 none   N/A   N/A  N/A      N/A
 3.1     OC3    0   1  off  off                 mgmt     1     2  N/A      N/A
 
 

  • To show L2 class interface

Overture_ISG5100# l2classify show


                                            Egress         Rate Limt          
RuleName Pri   Port      VLAN   DSCP Pbit   Port Q  Action Cir/Burst  PBit DSCP
-------------------------------------------------------------------------------
 OVR111   1    1.1       any    any  any    3.1 4 PU/  14 100/  100    no   no
 OVR311   1    3.1     15-15    any  any    1.1 4 PO/ n/a  no/    0    no   no

 

  • To check a status of port

Overture_ISG5100# port show 1.1 status

Showing Port status

Port  Type   Admin  Oper   Duplex Speed  AutoNeg Lpbk      RxErrTotal
------------------------------------------------------------------------------
1.1   Enet   up     up     Full   100M   n/a     disab     0000000000

 

  • To see port configuration

Overture_ISG5100# port show 1.1 config

                                      Admt   Dot InFwd   Spd  Full  Auto
Port    Type Admin Learn  Polc  Jmbo  Only    1p  Mode  100M   Dup   Neg  Xovr
-------------------------------------------------------------------------------
1.1    Enet    up   off   off    on   off   off sw/br    on    on   off   mdi
Overture_ISG5100#
 
 

  • To check VLAN setup

Overture_ISG5100# port show 1.1 vlan

                       Amt
Port    Type Pvid Pri Only IngF           Vlan/Label   Cir Burst Flow    Pause
-------------------------------------------------------------------------------
1.1    Enet    0   1  off  off                 none   N/A   N/A  N/A      N/A

 

  • To check details of the port

Overture_ISG5100# port show 1.1 detail

Showing port details

Port  Type    Drops      Rx         Tx         Q Disc     Bundle    
-------------------------------------------------------------------------------
1.1   Enet    0000000000 3611113990 0624990186 0000001727 N/A

 

  • To check detail counters

Overture_ISG5100# port show 1.1 detail counters

Showing port detailed counters
 -- Counters for 1.1 -------------------------------------------
TX_BYTES_GOOD  0663834660            RX_BYTES_GOOD  4136184967
TX_BYTES_TOTAL  0663834660            RX_BYTES_TOTAL  4136184402
TX_UNICAST_PKTS  0624988463         RX_SHORT_PKTS_GOOD  0000000000
TX_MULTICAST_PKTS  0000000000     RX_SHORT_PKTS_BAD  0000000000
TX_BROADCAST_PKTS  0000000006   RX_LONG_PKTS_GOOD  0000000000
TX_PAUSE_PKTS  0000000000              RX_LONG_PKTS_BAD  0000000000
TX_VLAN_PKTS  0000000000                 RX_UNICAST_PKTS  3611210914
TX_CRC_ERRS  0000000000                 RX_MULTICAST_PKTS  0000023969
TX_DEFERS  0000000000                       RX_BROADCAST_PKTS  0000000000
TX_EXCESS_DEFERS  0000000000     RX_PAUSE_PKTS  0000000000
TX_SINGLE_COLS  0000000000            RX_VLAN_PKTS  0000000000
TX_MULTI_COLS  0000000000               RX_CRC_ERRS  0000000000
TX_EXCESS_COLS  0000000000           RX_ALIGN_ERRS  0000000000
TX_LATE_COLS  0000000000                 RX_RUNTS  0000000000
TX_NORM_COLS  0000000000               RX_LENGTH_ERRS  0000000000
TX_FIFO_ERRS  0000000000                  RX_FALSE_CRS  0000000000
TX_PKTS_64  0347003901                       RX_PHY_ERRS  0000000000
TX_PKTS_127  0132025544                     RX_FIFO_ERRS  0000000000
TX_PKTS_255  0031918287                     RX_IGNORED  0000000000
TX_PKTS_511  0023211372                     RX_OPCODE_BAD  0000000000
TX_PKTS_1023  0045002001                   RX_PKTS_64  0316078920
TX_PKTS_1518  0045827364                   RX_PKTS_127  0267271711
                                                                         RX_PKTS_255  0224172537
                                                                         RX_PKTS_511  0125399747
                                                                         RX_PKTS_1023  0169824803
                                                                         RX_PKTS_1518  2508487175

 

  • To clear PM counters

Overture_ISG5100# port clear 1.1 pm-counters

 

  • To see PM result, only apply serial link not Ethernet.

Overture_ISG5100# port show 3.1 pm
Showing PM Counters

Port    Type    Section         ES        SES       SEFS         CV
------------------------------------------------------------------------------
 3.1     OC3                     0          0          0          0

Port    Type       Line         ES        SES         CV        UAS
------------------------------------------------------------------------------
 3.1     OC3                     0          0          0          0

Port    Type FarendLine       FEES      FESES      FESCV      FEUAS
------------------------------------------------------------------------------
 3.1     OC3                     0          0          0          0

Port    Type       Path         ES        SES         CV        UAS
------------------------------------------------------------------------------
 3.1     OC3                     0          0          0          0

Port    Type FarendPath       FEES      FESES       FECV      FEUAS
------------------------------------------------------------------------------
 3.1     OC3                     0          0          0          0
Overture_ISG5100#

  • To see queues

Overture_ISG5100# port show all detail queues

Port Type    Cntr   Queue0  Queue1  Queue2  Queue3  Queue4  Queue5  Queue6 
-------------------------------------------------------------------------------
1.1  GigSFP  Bytes  000000  000000  000000  000000  000000  000000  000000 
             Pkts   000000  000000  000000  000000  000000  000000  000000 
3.1  OC3     Bytes  000000  000000  000000  000000  000000  000000  000000 
             Pkts   000000  000000  000000  000000  000000  000000  000000

 

  • To see errors on the interface 

Overture_ISG5100# port show 1.1 errors
Showing Port Errors

Port    Type    RxCrc  RxAlign   RxRunt RxLength    RxCrs    RxPhy   RxFifo
------------------------------------------------------------------------------
1.1    Enet 00000000 00000000 00000000 00000000 00000000 00000000 00000000
 
 

  • To see live traffic on the link, default interval is 5 sec

Overture_ISG5100# port show 1.1 util

Per Second Utilization for Port(s) 1.1 Count=0 DisplayTime=5 Secs

Port    Type      TxPkts      RxPkts        TxBits        RxBits   Tx %   Rx %
-------------------------------------------------------------------------------
1.1    Enet           0        2166  0.000000Kbps 20.364153Mbps  0.000  20.36

Port    Type      TxPkts      RxPkts        TxBits        RxBits   Tx %   Rx %
-------------------------------------------------------------------------------
1.1    Enet           1        1538  0.672000Kbps 13.783864Mbps  0.000  13.78
 
 

  • To see log for alrams

Overture_ISG5100# log show alarm

Aug 13 19:31:53 isg5000 isgservices: FAULT TIME="Thu Aug 13 19:31:53 2009 " SEVERITY="Major" SLOT="Slot 3" DEVICE="port 1" ID="Section Loss of Frame (LOF)" SEQUENCE NUMBER="1" 
Aug 13 19:31:54 isg5000 isgservices: FAULT TIME="Thu Aug 13 19:31:54 2009 " SEVERITY="Cleared" SLOT="Slot 3" DEVICE="port 1" ID="Section Loss of Frame (LOF)" SEQUENCE NUMBER="2" 
Aug 13 19:33:12 isg5000 isgservices: FAULT TIME="Thu Aug 13 19:33:12 2009 " SEVERITY="Critical" SLOT="Slot 1" DEVICE="port 1" ID="Link failure" SEQUENCE NUMBER="3" 
Aug 13 19:34:36 isg5000 isgservices: FAULT TIME="Thu Aug 13 19:34:36 2009 " SEVERITY="Cleared" SLOT="Slot 1" DEVICE="port 1" ID="Link failure" SEQUENCE NUMBER="4" 
Aug 13 19:34:49 isg5000 isgservices: FAULT TIME="Thu Aug 13 19:34:49 2009 " SEVERITY="Critical" SLOT="Slot 1" DEVICE="port 1" ID="Link failure" SEQUENCE NUMBER="5" 
Aug 13 19:45:37 isg5000 isgservices: FAULT TIME="Thu Aug 13 19:45:37 2009 " SEVERITY="Cleared" SLOT="Slot 1" DEVICE="port 1" ID="Link failure" SEQUENCE NUMBER="6" 
Aug 13 19:46:37 isg5000 isgservices: FAULT TIME="Thu Aug 13 19:46:37 2009 " SEVERITY="Critical" SLOT="Slot 1" DEVICE="port 1" ID="Link failure" SEQUENCE NUMBER="7" 

 

  • To see log for command history

Overture_ISG5100# log show command 

Sep  1 12:48:10 isg5000 cli_sh: CLI USER="AshburnCMC" IP_ADDR="153.39.198.229" CMD="port show all vlan"
Sep  1 12:52:40 isg5000 cli_sh: CLI USER="AshburnCMC" IP_ADDR="153.39.198.229" CMD="port show 1.1 status"
Sep  1 12:52:56 isg5000 cli_sh: CLI USER="AshburnCMC" IP_ADDR="153.39.198.229" CMD="port show 1.1 detail"
Sep  1 12:52:58 isg5000 cli_sh: CLI USER="AshburnCMC" IP_ADDR="153.39.198.229" CMD="port show 1.1 detail"
Sep  1 12:53:16 isg5000 cli_sh: CLI USER="AshburnCMC" IP_ADDR="153.39.198.229" CMD="port show 1.1 detail counters"
Sep  1 12:54:12 isg5000 cli_sh: CLI USER="AshburnCMC" IP_ADDR="153.39.198.229" CMD="port show 1.1 detail counters"
Sep  1 12:54:13 isg5000 cli_sh: CLI USER="AshburnCMC" IP_ADDR="153.39.198.172" CMD="port show 1.1 status"
Sep  1 12:54:18 isg5000 cli_sh: CLI USER="AshburnCMC" IP_ADDR="153.39.198.172" CMD="port show 1.1 status"
Sep  1 12:54:40 isg5000 cli_sh: CLI USER="AshburnCMC" IP_ADDR="153.39.198.172" CMD="port show 1.1 counters "
Sep  1 12:54:52 isg5000 cli_sh: CLI USER="AshburnCMC" IP_ADDR="153.39.198.172" CMD="port show 1.1 detail"
Sep  1 12:54:57 isg5000 cli_sh: CLI USER="AshburnCMC" IP_ADDR="153.39.198.229" CMD="port show 1.1 detail counters"
Sep  1 12:55:09 isg5000 cli_sh: CLI USER="AshburnCMC" IP_ADDR="153.39.198.172" CMD="port show 1.1 status"
:

:

 

  • To see all config

 Overture_ISG5100# show status

 

  • To see start configuration

Overture_ISG5100# config show

 

 

Last Updated (Friday, 25 September 2009 15:32)

 
Smart Link
Search
Statistics
Content View Hits : 2152029
Polls
Highly recommended firewall vendor?
 
Google Translation
English Arabic Chinese (Simplified) Czech Dutch French German Italian Korean Portuguese Russian Spanish Filipino Vietnamese Thai Turkish
BGP routing issue?
Banner
World Route Servers
Banner
Who's Online
We have 34 guests online