Home Vendor Tallabs How to configure VLAN loop on the Tellabs 8860

Testing Ethernet circuit (Baseband) is totally different from broadband circuit. However, if you have Ethernet tester (such as Acterna), you can do RFC testing to prove continuity. logo_tellabs.gif

Here is how to put a VLAN loop at tellabs. In this example,

For example>

Device#1 <--->(Side id 1:ge-1/1/1/1, VLAN111) Tellabs 8860 (Side id 2:so-2/2/2/2:1, VLAN222) <--->Device#2

 

1. Delete current circuit

Tellabs_8860> enable
Tellabs_8860> config ckt name CiscoNET.Link admin disable
Tellabs_8860> config no ckt name CiscoNET.Link

2. Create a loop path as named LOOP

Tellabs_8860> enable
Tellabs_8860> config ckt name LOOP type vlan
Tellabs_8860> side id 1 interface so-2/2/2/2:1
Tellabs_8860> side id 1 vlan id 222
Tellabs_8860> side id 2 interface so-2/2/2/2:1
Tellabs_8860> side id 2 vlan id 222
Tellabs_8860> admin enable
Tellabs_8860> exit

To restore the circuit.

3. Delete the loop path

Tellabs_8860> enable
Tellabs_8860> config ckt name LOOP admin disable
Tellabs_8860> config no ckt name LOOP

4. Retore origin path

Tellabs_8860> enable
Tellabs_8860> config ckt name CiscoNET.Link type vlan
Tellabs_8860> side id 1 interface ge-1/1/1/1
Tellabs_8860> side id 1 vlan id 111
Tellabs_8860> side id 2 interface so-2/2/2/2:1
Tellabs_8860> side id 2 vlan id 222
Tellabs_8860> admin enable
Tellabs_8860> exit all

 

Last Updated (Thursday, 29 October 2009 21:42)

 
Smart Link
Search
Statistics
Content View Hits : 2127973
Polls
Highly recommended firewall vendor?
 
Google Translation
English Arabic Chinese (Simplified) Czech Dutch French German Italian Korean Portuguese Russian Spanish Filipino Vietnamese Thai Turkish
BGP routing issue?
Banner
World Route Servers
Banner
Who's Online
We have 99 guests online